How to do the needle printer paper does not absorb paper？

The problem of needle printing paper not absorbing paper can be caused by a variety of reasons, the following are some common solutions:

First, check the paper and paper feeding mechanism

1.Paper quality:

Make sure that the needle paper used is of good quality, but thin and thick, and the surface is smooth and smooth. Paper that is too thin may cause paper jams, and too thick may not get into the printer. In general, the paper used for printing should not weigh more than 60 grams.

Check the paper for moisture, and if the paper is wet, replace it with dry paper.

2.Paper placement:

Position the paper correctly, making sure that the front of the paper is placed in the printer feed slot, as far forward as possible, so that the printer can successfully grasp the paper.

Check that the position of the paper is accurate to avoid paper deviation resulting in failure to feed paper.

3.Paper feeding mechanism:

Check whether the printer paper feed mechanism is blocked by foreign objects, such as broken paper, dust, etc. If so, it should be carefully cleaned to avoid damaging the internal parts of the printer.

Check whether the paper feed wheel is dirty or damaged, if so, you can use a soft cloth and a small amount of cleaning liquid to clean the paper feed wheel, and replace the new paper feed wheel if necessary.

Second, check the printer status and Settings

1.Power Supply and connection:

Ensure that the printer power supply is stable, with no voltage fluctuations or power failures.

Check that the printer is properly connected to the computer, including data cables and drivers. If the driver is outdated or damaged, try to update or reinstall it.

2.Sensor and lever:

Check whether the printer feed sensor is working properly and clean the sensor if necessary.

Adjust the lever position to ensure it is set correctly for the type and thickness of paper used.

3.Error message:

Pay attention to whether the printer has error or alarm information, and handle according to the prompt.

Third,Other possible causes and solutions

1.Carton installation:

If the printer uses a carton, check that the carton is installed correctly and the paper is placed neatly.

2.Paper Type:

Some needle printers may not support a particular type of paper well, try replacing a different type of paper to see if it solves the problem.

3.Printer internal failure:

If the above methods can not solve the problem, there may be a more serious fault inside the printer. At this point, it is recommended to contact professional maintenance personnel for further inspection and repair.

Fourth,Preventive measures

1.Regular cleaning:

Clean the inside of the printer regularly, especially the paper feed mechanism and print head, to keep the printer in good working condition.

2.Use original consumables:

As far as possible, use original or reliable quality consumables, such as printing paper, ribbon, etc., to reduce the probability of failure.

3.Avoid overuse:

Avoid continuous printing for a long time to reduce the occurrence of printer wear and failure. When printing a large number of files, you can take a break for a while before continuing to print.

In summary, the problem of needle printing paper not absorbing paper may involve many aspects, and it needs to be investigated and solved one by one according to the specific situation. If the problem is more complex or difficult to solve, it is recommended to seek the help of professional maintenance personnel.