How to ensure that PET dumb silver thermal label paper does not jam in the printing process?

In order to ensure that PET dumb silver thermal label paper does not jam in the printing process, you can start from the following aspects:

1. Choose the right printer and carbon tape

Printer selection: Ensure that the selected printer supports the specifications and materials of PET matte silver thermal label paper. Different printers have different adaptability to paper, so choosing a printer with good compatibility is crucial.

Carbon tape selection: For thermal printing, although carbon tape is usually not required, if it is a thermal transfer method, you need to choose the appropriate carbon tape. Low temperature resin carbon tape is a good choice because it can improve printing results, while protecting the print head and drum, reducing wear and clogging, thereby indirectly reducing the risk of paper jams.

2. Install and use paper correctly

Paper size matching: Ensure that the specifications of PET matte silver thermal label paper match the requirements of the printer, including width, length and thickness.

Correct placement of paper: According to the requirements of the printer instructions, the correct placement of paper to ensure that the paper is flat, wrinkle-free, and the tension adjustment is appropriate.

Avoid mixing different sizes of paper: Do not mix different sizes and sizes of paper, only put the same size and size of paper at a time, to avoid adding paper halfway to cause paper jams.

3. Printer setup and maintenance

Reasonable setting of printing parameters: According to the characteristics of PET dumb silver thermal label paper, set the printing temperature, speed and other parameters of the printer reasonably to avoid too high or too low setting affecting the printing quality or causing paper jam.

Clean the printer regularly: clean the printer's print head, drum and other parts regularly, remove dust, paper and other debris, and keep the printer in good condition.

Check the printer status: Check whether the printer works properly before printing, such as whether the driver is installed correctly and whether the line is connected well.

4. Environmental factors control

Storage environment: Store PET matte silver thermal label paper at room temperature and appropriate relative humidity to avoid paper deformation or static electricity in a dry or humid environment.

Avoid direct sunlight: the printed label paper should not be exposed to sunlight for a long time to prevent fading or deformation. At the same time, the printer and paper should also avoid long-term direct sunlight, so as not to affect the printing effect and machine performance.

5. Other precautions

Check the quality of the paper: ensure that the PET dumb silver thermal label paper purchased is qualified, without damage, wrinkles and other problems.

Avoid frequent paper changes: During continuous printing, try to avoid frequent paper changes to reduce the risk of paper jams.

In summary, by choosing the right printer and carbon tape, correctly installing and using paper, reasonably setting printer parameters, regularly cleaning the printer, controlling environmental factors and paying attention to other related matters, you can effectively ensure that PET dumb silver thermal label paper is not stuck in the printing process.