What should we pay attention to when transporting TTO high-speed code carbon belt?

When transporting the TTO (thermal transfer printing) high-speed coding carbon belt, in order to ensure that the quality of the carbon belt is not damaged, and the smooth arrival of the site of use, it is necessary to pay attention to the following aspects:

First, environmental control

1. Temperature and humidity: According to the storage requirements of the carbon belt, the ambient temperature should be kept between -5 ° C and 40 ° C and the relative humidity between 20% and 85% during transportation. Avoid extreme temperature or humidity conditions to prevent the carbon strip from becoming damp, deformed or aged.

2. Light: Avoid direct exposure of the carbon strip to sunlight, long-term sunlight exposure may cause the carbon strip to fade or decline in performance.

Second, Packaging and protection

1. Packaging integrity: Ensure that the packaging of the carbon belt is intact and well sealed to prevent dust, moisture or other contaminants from entering the inside of the package.

2. Anti-shock measures: In the transportation process, appropriate anti-shock measures should be taken, such as the use of foam, air cushion film and other packaging materials, in order to reduce the damage caused by vibration and impact on the carbon belt during transportation.

Third, Mode and time of transportation

1. Choice of transportation mode: According to the transportation distance and cost consideration, choose the appropriate transportation mode. For long-distance transportation, it is recommended to choose air or land transportation (such as truck transportation), and ensure that environmental conditions such as temperature and humidity are controllable during transportation.

2. Transportation time control: minimize transportation time to avoid long-term exposure of carbon belts to adverse environmental conditions during transportation. For orders that take a long time to ship, consider shipping in batches or choosing a faster shipping method.

Fourth, storage and access

1. Storage after arriving at the destination: After arriving at the destination, the carbon belt should be stored in a warehouse or storage area that meets the requirements in a timely manner. Ensure that the storage environment meets the requirements for temperature and humidity, and periodically check the storage status of the carbon tape.

2. Use precautions: When using the carbon belt, you should pay attention to keep your hands clean and dry to avoid polluting the surface of the carbon belt. At the same time, the carbon belt should be used in accordance with the principle of first-in-first-out to ensure that the carbon belt produced first is used first.

Fifth, Comply with relevant regulations and standards

During the transportation process, the relevant transportation regulations and safety standards should also be followed to ensure the safety and compliance of the transportation process. For example, for the transport of hazardous chemicals, specific transport regulations and safety measures need to be observed.

To sum up, it is necessary to pay attention to environmental control, packaging and protection, transportation mode and time, storage and access, and compliance with relevant regulations and standards when transporting TTO high-speed coding carbon belts. By taking appropriate measures and precautions, it is possible to ensure that the quality and performance of the carbon belt are not compromised during transportation.