How to properly store colored all-resin carbon strips?

The correct storage of color all-resin carbon strip is the key to ensure its stable performance and prolong its service life. Here are some suggestions for storing colored all-resin carbon strips:

First, storage environment requirements

1. Temperature:

Recommended temperature range: 10 ° C 30 ° C (or -5 ° C 40 ° C wide range, but it should be noted that low temperature may affect the softness of the carbon belt, high temperature may accelerate aging).

Avoid storing carbon strips in extremely high or low temperature environments to prevent thermal deformation or freezing damage.

2. Humidity:

Keep relatively dry, humidity should not be too high. The recommended relative humidity ranges from 15% to 85%.

Avoid humid environments to prevent the carbon strip from getting wet, sticking, or chemical reactions.

3. Illumination:

Avoid long-term direct sunlight or strong light exposure to prevent the carbon strip from fading and aging.

Second, packaging and storage method

1.Preservation of the original packaging: Keep the original packaging of the carbon belt as much as possible, because the original packaging usually has the function of moisture-proof and dust-proof.

2.Sealed storage: If you need to open the original package, you should use a clean, well-sealed container to repackage the carbon belt to prevent dust, oil and other pollution.

3.Avoid stacking: Do not stack multiple rolls of carbon tape to prevent each other from squeezing and deformation.

Third, other precautions

1.Regular inspection: Check stored carbon strips regularly to make sure they are not damp, discolored, or damaged.

2.First in, first out: Follow the "first in, first out" principle of using carbon strips to ensure that the latest production batch is always used.

3.Avoid chemical contact: Store carbon strips away from chemicals and corrosive substances to prevent chemical reactions.

Fourth, handling of special cases

If the carbon strip is accidentally damp, dry it as soon as possible and check whether its performance is affected. If the performance deteriorates significantly, do not continue to use it.

If the carbon belt is contaminated or damaged during storage, it should be decided whether to scrap or take other remedial measures as appropriate.

To sum up, the correct storage of color resin carbon strips requires attention to environmental factors such as temperature, humidity, and light, and appropriate packaging and storage methods. By following these recommendations, you can ensure that the performance of the carbon strip is stable and the service life is extended.