How to properly install color all resin carbon to the printer?

To properly install the colored all-resin carbon onto the printer, generally follow these steps. Please note that different brands and models of printers may differ in specific details, but the basic steps are similar. The following steps take general bar code printers as an example:

First, preparation

1.Confirm ribbon type: Make sure that the colored all-resin ribbon purchased is appropriate for your printer model.

2.Power off the printer: Before performing any maintenance or consumable replacement, always power off the printer and unplug the power cord to ensure safety.

Second, open the printer cover

1.Locate and open the top cover: Locate and open the top cover of the printer according to the printer instructions or the logo on the printer.

Third, install the carbon belt

1.Release the print head module: Some printers need to release the print head module to expose the carbon tape mounting area. This is usually done by pressing or pulling a specific clip or rod on the printer.

2.Prepare the carbon strip: disassemble the carbon strip roll and the empty coil core and prepare the carbon strip.

3.Insert the carbon tape roll: Insert the carbon tape roll into the carbon tape supply end according to the instructions on the printer. Usually, the carbon strip will have a label or arrow on one side indicating its correct insertion direction.

4.Fixed carbon lead: Roll one end of the carbon strip onto the empty core in small amounts, and ensure that the carbon lead is fixed on the empty core so that it can be recovered smoothly during the printing process.

5.Insert empty coil: Insert the empty coil with carbon head into the carbon strip recovery end.

6.Adjust carbon tape tension: According to the instructions on the printer manual, adjust the tension of the carbon tape to ensure that the carbon tape can maintain the appropriate tightness during the printing process.

Fourth, close the print head module and top cover

1.Close the printhead module: If you loosened the printhead module before, you now need to close and secure it.

Close top cover: Close and lock the top cover of the printer.

Fifth, test printing

1.Reconnect the power supply and turn it on: Reconnect the power cable to the printer and press the power button to turn it on.

2.Perform test printing: According to the instructions on the printer manual, perform test printing to ensure that the carbon strip is properly installed and can work properly.

Matters needing attention

1.Safe operation: Before any maintenance or consumable replacement, be sure to turn off the printer and unplug the power cord to avoid the risk of electric shock.

2.Read the instructions carefully: Different brands and models of printers may have different methods of installing carbon strips, so be sure to read the printer instructions carefully and follow the instructions.

3.Avoid scratching the print head: When installing the carbon belt, avoid using sharp objects to scratch the print head, so as not to affect the print quality.

4.Keep the environment clean: Before installing the carbon belt, ensure that the internal and surrounding environment of the printer is clean and dust-free to avoid dust and other debris affecting the use of the carbon belt.

By following the above steps and precautions, you can properly mount the colored all-resin carbon tape to the printer and ensure that it works properly.